Wire Rope Clamp BG-100 for Modern Wire Ropes
Modern wire ropes require modern wire clamps
IronGrip BG-100 is a wire rope clamp developed for secure fastening of modern wire ropes. Based on more than 50 years of experience in wire rope fastening, BG-100 has become an industry standard for on-site wire rope fastening and demanding lifting applications.
Modern wire ropes are stronger and more specialised than ever before. BG-100 was developed to meet these requirements, combining simplified installation, documented performance and high fastening efficiency.
BG-100 is available through IronGrip’s distributor network.
Looking for product presentations or mounting instructions?
Feel free to download them here.
Why Choose BG-100?
BG-100 is designed to make wire rope fastening safer, easier and more efficient.
Key Benefits
- Only 2 wire rope clamps required per fastening
- Tested by independent accredited testing bodies
- Approved for lifting applications according to EN 13411-3:2004
- Efficiency above 90% of the wire rope’s minimum breaking load
- Fully symmetrical design so that the Wire Clamp can be mounted in any direction
- Suitable for both right-hand and left-hand lay wire ropes
- Hot-dip galvanised castings for long service life
- Reduced installation time and material consumption
- Full documentation, traceability and mounting instructions
See BG-100 in Action
Designed for Modern Wire Rope Technology
Today’s standard wire ropes can carry loads up to 40% higher than wire ropes used only a few decades ago. As wire rope technology has evolved, wire ropes have become stronger and more specialised. Modern wire ropes require fastening solutions that match these developments. BG-100 was developed specifically to meet the demands of modern wire ropes while simplifying installation and improving fastening performance.
Only Two Clamps Per Fastening
With older and more basic types of wire clamps, between three and seven clamps may be required per fastening. BG-100 requires only two wire rope clamps for all dimensions.
Benefits of Using Fewer Clamps
- Faster installation
- Lower material costs
- Reduced maintenance
- Less space required on the wire rope
- Easier inspection
- Better overall economy
Thanks to the increased efficiency of each clamp, fewer clamps are required per fastening. This reduces both installation time and material consumption while providing a secure fastening solution.
Designed for Secure Wire Rope Fastening
BG-100 is based on IronGrip’s proven fastening technology. The clamp forces the wire rope into an S-shape, increasing friction without damaging the wire rope itself. This increases fastening efficiency while maintaining the integrity of the wire rope. The fully symmetrical design allows installation in any direction, reducing installation errors and simplifying mounting on site. Unlike many traditional wire rope clamps, BG-100 can be used regardless of whether the wire rope has a right-hand or left-hand lay.
Approved for Lifting Applications
BG-100 wire rope clamps have been tested by accredited bodies according to EN 13411-3:2004 and are approved for general lifting applications up to strength class 1960 N/mm². For lifting applications, two BG-100 wire rope clamps are used per fastening across all dimensions.
Always follow the mounting instructions and ensure that the wire rope is new and undamaged when the clamps are applied.
Applications
BG-100 is suitable for a wide range of lifting and fastening applications where secure wire rope fastening is required.
Typical applications include:
- Cranes
- Elevators and lifts
- Suspended loads
- Construction sites
- Industrial lifting systems
- Offshore installations
- Structural wire rope fastenings
- Bridges and infrastructure projects
Quality, Documentation and Traceability
BG-100 is manufactured according to IronGrip’s stringent quality requirements and ISO 9001 standards. The design and testing are thoroughly documented, and every wire rope clamp can be traced back to its manufacturing origin.
For projects where documentation, quality assurance and long-term reliability are important, BG-100 provides complete traceability and supporting documentation.
Technical Specifications
| Model | Recommended wire rope diameter |
|---|---|
| BG-600 | 5–6 mm |
| BG-800 | 6.5–8 mm |
| BG-1000 | 8.5–10 mm |
| BG-1200 | 11–12.5 mm |
| BG-1600 | 13–16 mm |
| BG-2000 | 17–20 mm |
| BG-2500 | 21–25 mm |
| BG-3400 | 26–34 mm |
Materials and Technical Data
- Bolt strength class: 8.8 according to ISO 3506
- Corrosion protection: Hot-dip galvanised according to ISO 1461 or Geomet surface protection according to EN 13858
- Bolt protection: Electro-galvanised according to ISO 2081 or Geomet surface protection according to EN 10683
- Operating temperature: -50°C to +250°C
Documentation
Need more detailed product information? Download the official product presentation and mounting instructions.
Product Presentation
Technical specifications, testing results, lifting approvals, applications and product benefits.
Mounting Instructions
Correct installation procedures, tightening recommendations and maintenance guidance for BG-100 wire rope clamps.
Frequently Asked Questions
Yes. BG-100 can be used with both right-hand and left-hand lay wire ropes.
BG-100 is available through IronGrip’s distributor network. Visit the distributor page or contact IronGrip for assistance.
Find a Distributor
Looking for a wire rope clamp for modern lifting and fastening applications?
BG-100 is available through IronGrip’s distributor network.